Maison

CALL US AT ANY OF OUR 7 LOCATIONS:  Ft. Collins  Boulder   S. Colorado Blvd      N. Denver   Park Meadows     Highlands Ranch

Title Image

Shop Fitness Gallery

Ecore 8mm Interlocking Rubber Floor Tile – Gripping Gray Border (23″ x 23″)

MSRP: $23.99


For the guaranteed lowest price, call Fitness Gallery at 303-399-1000

Ecore’s 8mm Interlocking Rubber Floor Tile is the “original” composition rubber fitness floor, built to stand up to daily workouts in your home gym. This gripping gray border piece is part of Ecore’s Basic Fit line; border pieces finish the straight outside edges of an area-mat layout.

  • 8mm vulcanized composition rubber that’s slip resistant, wet or dry
  • Border piece for clean area-mat or wall-to-wall layouts
  • 23″ x 23″ tile covers about 3.67 sq. ft.
  • 10.4% force reduction and 71.9% energy restitution
  • DIY friendly: interlocking tiles install quickly with no adhesive
  • Reduces impact noise and handles moderate weight impacts
  • Made in the U.S.A. with reclaimed rubber; fully recyclable at end of life

Description

Ecore 8mm Interlocking Rubber Floor Tile – Gripping Gray Border

Ecore’s Fit Collection is the “original” recycled composition rubber fitness floor. With its durability, low life-cycle costs, easy maintenance and sustainable design, it’s a go-to choice for home gyms, cardio areas, selectorized strength and free-weight spaces. This border piece comes in Gripping Gray (black with gray flecks; Ecore calls this color Grippin Gray 10).

 

Interlocking Tiles Are Quick & Easy to Install

Interlocking tiles go down without adhesive. Lay the tiles out to the length and width you want and connect the tabs. Pair border pieces with matching center tiles to create clean, straight outside edges, and add corner pieces where two edges meet. For a wall-to-wall floor, Ecore recommends starting in the middle of the room, cutting the last pieces with a straight edge and utility knife, and leaving 1/4″ around the perimeter for expansion.

 

Comfort and Protection Underfoot

Ecore’s 8mm vulcanized composition rubber offers 10.4% force reduction and 71.9% energy restitution in typical Deltec field testing, along with a slip-resistant surface wet or dry. It also helps reduce impact noise in your workout space.

 

Installation Tips
  • For indoor use only, in rooms kept between 55 and 75 degrees F
  • Let tiles acclimate in the room for 48 hours before installing
  • Install corner to corner, with all tiles facing the same way using the directional arrows on the bottom
  • Not suitable for installation over radiant heat
  • Ecore suggests extra matting in heavy free-weight areas to protect tiles from repeated high impact

 

How Many Tiles Do I Need?

Center tiles have interlocking tabs on all four sides, border tiles have one straight finished edge for the sides of your floor, and corner tiles have two straight edges to finish each corner. Each tile covers 23″ x 23″ once installed. Use the chart below to plan a finished area mat:

Floor Size (approx.) Corners Borders Centers Total Tiles
46″ x 46″ (3’10” x 3’10”) 4 0 0 4
46″ x 69″ (3’10” x 5’9″) 4 2 0 6
46″ x 92″ (3’10” x 7’8″) 4 4 0 8
69″ x 69″ (5’9″ x 5’9″) 4 4 1 9
69″ x 92″ (5’9″ x 7’8″) 4 6 2 12
92″ x 92″ (7’8″ x 7’8″) 4 8 4 16
92″ x 115″ (7’8″ x 9’7″) 4 10 6 20
115″ x 115″ (9’7″ x 9’7″) 4 12 9 25

 

Learn More:

 

ABOUT ECORE ATHLETIC

Ecore manufactures its rubber flooring in the U.S.A. from its home base in Lancaster, Pennsylvania.

Ecore’s Fit Collection is the company’s “original” recycled composition rubber fitness floor. It’s built from vulcanized composition rubber (VCR) made with reclaimed rubber, and it’s fully recyclable at the end of its life. Ecore designs its VCR surfaces for durability, safety, ergonomics and acoustics, so the same flooring used in gyms, training facilities and schools is available for your home gym.

Visit any of our Colorado showrooms to see Ecore samples in person, or call us at 303-399-1000 for help planning your floor layout.

Additional information

Dimensions 23 × 23 × 0.31 in
Technical Specifications

Material: Vulcanized composition rubber (VCR), reclaimed rubber Thickness: 8mm (0.31") Tile size: 23" x 23" (0.58m x 0.58m) Piece type: Border Color: Gripping Gray (Ecore EL02) Force reduction: 10.4% (typical Deltec field test) Energy restitution: 71.9% (typical Deltec field test) Coefficient of friction (ASTM D2047): >0.8 Impact Insulation Class (ASTM E492): 51 Delta IIC (ASTM E2179): 22 FloorScore (CA 01350): Certified Abrasion resistance (ASTM D3389): Pass Flammability, pill test (ASTM D2859): Pass Made in the U.S.A.

Physical Specifications

Dimensions: 23" x 23" x 8mm Coverage: approx. 3.67 sq. ft. per tile Installation: Interlocking, loose lay (no adhesive) Use: Indoor only

Extras

Not suitable over radiant heat Acclimate 48 hours before installing Allow 1/4" expansion gap at walls Clean with a microfiber mop; do not flood with water

You may also like…